Bột Epoxy KCC Trám trét

HƯỚNG DẪN THI CÔNG SƠN

Hướng Dẫn Thi Công Bột Epoxy KCC Trám trét

Application Details

Surface Preparation:

Remove any oil and grease from surface to be coated with clean rage soaked in Thinner No. 003 or Toluene. Do not apply coating unless concrete has cured at least 28 days at 20℃ /68℉ and below 80% R.H or equivalent. The surface moisture must be below 6%. The surface should be free of laitance. This can be accomplished by finishing technique, abrasive blasting, grinding or acid-etching.

Concrete’s compressive strength must be over 160 kgf/cm² and if strength is over 260 kgf/cm², abrasive blasting is recommended to surface treatment.

Preceding Coat: UNIPOXY PRIMER or UNIPOXY PRIMER(HIGH VISCOSITY)

Application Conditions: Temperature during application and curing is suitable for 10℃ -28℃ /50℉-82℉, and below 85% R.H. and paint temperature is suitable for 20℃ /68℉

Mixing: PTA(Base) : PTB(Curing Agent) = 1.9 : 1 (by volume).

Mix separately, then combine together and mix thoroughly with high speed dissolver for 2-3 minutes prior to application in the proportions as delivered.

Pot Life & Recoating Interval:

Substrate	5°C	20°C	30°C
Pot Life	3 h	1 h 30 m	1 h
R/I (Min.)	17 h	5 h	3 h 30 m
R/I (Max.)	30 d	21 d	14 d

Thinning: Not required

Method of Application: Putty knife or Spatula..

Typical Film Thickness: Recommended one coat 500 ㎛ dry

Subsequent Coating: Before subsequent coating , sanding and solvent cleaning must be done.

Shelf Life: 12 months (Store in cool, dry, well-ventilated place)

Standard Packing Unit: 9 L (PTA : PTB = 5.9 L : 3.1 L)

Warning:

1. Thinning leads to defect of curing and property then it is not required.
2. Thickness over 500µm at one coat may cause delay of drying or crack.
3. Painting UNIPOXY PRIMER on UNIPOXY PUTTY may cause a defect because of moisture absorption.

So, painting the UNIPOXY PUTTY first before the UNIPOXY PRIMER.

1. Unipoxy Lining is Outdoor exposure or exposure to ultraviolet radiation by indoor lighting inside the many on-site. It makes Properties of Epoxy paint discoloration (yellowing) and Chalking will occur.
2. The paint compounds would occur a headache, dizziness, loss of coordination and health problems, so do not breathe vapors, spray mist & fumes and do not eat the compounds.
3. During application, to avoid breathing vapors or spray mist, wear the protective mask, protective glasses, gloves and suitable protective equipment
4. Please avoid contact with eyes and skin during application, in case of contact with skin and eyes or eating paint, get the first aids by the paint can label on the side and then get the medical assistance by physician immediately
5. Do not apply the paint in restricted areas. If you are obliged to apply in restricted areas, use the ventilation machine to blow out, all workers should wear a protective mask

i. . If you have some questions about products or you want to know harmfulness information, you can get the technical datasheets and MSDS on our Internet Homepage

Quý khách có nhu cầu về thi công sơn KCC hãy liên hệ ngay với công ty chúng tôi để nhận được sự tư vấn và sử dụng dịch vụ thi công tốt nhất cho công trình của quý khách.

Thông tin liên hệ :

CÔNG TY TRÁCH NHIỆM HỮU HẠN THƯƠNG MẠI DỊCH VỤ CHÍ HÀO

Địa chỉ: 606/76/4 Quốc Lộ 13, phường hiệp Bình Phước, Quận Thủ Đức, TP.Hồ Chí Minh

Điện thoại: 028 626 757 76 – Fax: 028 626 757 28

Di động :    0903.11.22.26

Website: sonsanepoxy.org