Sơn Epoxy Chống Tĩnh Điện KCC

Sơn Epoxy Chống Tĩnh Điện KCC Là sản phẩm này là loại sơn epoxy gốc polyamide có thành phần hai thành phần với khả năng chống nước tuyệt vời, hóa chất, mài mòn và tác động chống tĩnh điện .

Nội dung

Tìm hiểu về Thi công Sơn nền Epoxy

Mô tả Sơn Epoxy Chống Tĩnh Điện KCC

Sơn Epoxy Chống Tĩnh Điện KCC

This Specification is applied ANTIDUST, ANTISTATIC epoxy floor coating declared on the drawing. As this product is a two-component, polyamide cured epoxy resin based paint with excellent resistance to water, chemical, abrasion and impact and antistatic effect, it is applied with KCC or another product above equality after submitting samples and gaining the approval of the inspector.

Recommended Use Sơn Epoxy Chống Tĩnh Điện KCC

Floor of clean room, pharmaceutical factory and surgical operation room.
Place handling flammable gas, chemicals, organic solvent.
Floor of electric, computer and semi conductor industries.
Place requested anti-dust and anti-static effect.

Application

1 . Surface Preparation

(1) Concrete must be cured at least 30 days at 20℃/68℉ and below 85% R.H.

(2) Remove any oil and grease from surface to be coated. Surface must be grinded or abrasive blasted to remove laitance and other impurities.

(BLASTING, CHIPPING, DIAMOND WHEEL GRINDING or 10％ HCL cleaning)

(3) Optimum pH value is 7~9 (Moisture content of the concrete surface must be below 6%)

(4) Fill up a gap or groove with a UNIPOXY PUTTY, The portion where the crack is serious need to be repaired with a epoxy resin mortar and in the case of new construction joint after coating need to be cut and sealed with a PU9330(N).

(5) If wall is close to floor, do v-cutting the edge of the region.

(6) Pay attention to secure substrate smoothness because substrate smoothness is an important element of anti-static performance.