Sơn Epoxy Chống Axit KCC

Sơn Epoxy Chống Axit KCC là loại sơn chống acid 2 thành phần, hệ tự trải phẳng, nó có khả năng kháng acid, kháng hóa chất.v.v và là sản phẩm thân thiện với môi trường. Độ cứng tuyệt hảo, chịu mài mòn cao, chống va đập và độ bền cực cao, là một sản phẩm tuyệt vời.

Danh mục: Sơn KCC, Sơn Sàn Epoxy

OVERVIEW

UNIPOXY CHEMIAL RESISTANCE ET550 is a solvent-free, self levelling type epoxy floor coating with outstanding hight resistance to acid and chemical.v.v. it is environmentally friendly

It forms hard, tough, smooth finish and has excellent durability, resistance to abrasion, impact.

Recommended Use As a top coat on concrete floors subjected,where is resistance tochemical hight acid and heavy duty.solvent free and low odor, excellent resistance to abrasion.

Used place where high impact and chemical resistance in loading areas is required.

Excellent for laboratory floors, nuclear power plant, hospital, electronic, chemical plant, pharmaceutical, etc.

Bột Epoxy KCC Trám trét
Sơn Epoxy Chống Tĩnh Điện KCC
Sơn Epoxy KCC 2 Trong 1 Phủ Trong Nhà
Sơn Epoxy KCC Lớp Đệm

PHYSICAL PROPERTIES

Sơn Epoxy Chống Axit KCC

Finish and Color: Gloss. Green, Grey. Other colors are available on request.

Drying Time:

	10°C	20°C	30°C
Set to touch	7 h	4 h	3 h
Dry through	35 h	16 h	13 h
Fully cured	9 d	7 d	5 d

Sơn Epoxy Chống Axit KCC

Solids by Volume: Approx. 98 %

Spreading Rate (Theoretical): 2.04 l/m² in 3 mm dry film thickness on a smooth surface

3.08 l/m² in 3 mm dry film thickness on a smooth surface.

Specific Gravity: Mixed : Approx. 1.05 ~ 1.55 kg/L, follow colors.

Flash Point: Qpprox 25°C/77°F or over(Closed cup ).

Chemical property:

Chemical	Test result
H₂SO₄ (70%)	No color change and no film default
HNO₃ (30%)	No color change and no film default
HCL (20%)	No color change and no film default
H₃PO₄ (70%)	No color change and no film default
H₂O₂ (22%)	No color change and no film default
NaOH	No color change and no film default
Ca(OH)₂	No color change and no film default

Sơn Epoxy Chống Axit KCC

Test method: ASTM D 1308:2002, on 7 days

CÔNG TY KCC Việt Nam, thuộc tập đoàn hóa chất KCC trụ sở chính hiện đặt tại Hàn Quốc. Ngoài trụ sở chính, KCC hiện có 13 nhà máy tại Hàn Quốc và 12 nhà máy và chi nhánh tại các quốc gia khác trên toàn thế giới như Singapore, Malaysia, Trung Quốc, Ấn Độ, Thổ Nhĩ Kỳ và Việt Nam.

Trở về trang chủ: https://sonsanepoxy.org/

Hướng Dẫn Thi Công Sơn

APPLICATION DETAILS

Surface Preparation:

Remove any oil and grease from surface to be coated with clean rage soaked in Thinner No. 003 or Toluene.

Concrete must be intensity minimum is 260 kg/cm²

Do not apply coating unless concrete has cured at least 28 days at 20°C/68^oF and below 80 % R.H or equivalent. The surface moisture must be below 6 %.

The surface should be free of laitance.

Preceding Coat:

KOREPOX PRIMER/SEALER EP118 or according to specification.

Anti-Acid ET5500 must be coated with two times (1st : scrapping 0.5 mm coating, 2 nd: main 1.5 mm coating ) to prevent bubble occurrence due to concrete void and coating defect due to polluted material.

Application Conditions:

Temperature during application and curing is suitable for 10^oC ~ 28°C / 50°F ~ 82°F and below 85 % R.H. and paint temperature is suitable for 20°C / 68°F

d.Mixing:

PTA(Base) : PTB (Curing Agent ) = 2.2 : 1 (by volume ).

Mix separately, then combine together and mix thoroughly with high speed dissolver for 2-3 minutes prior to application in the proportions as delivered.

Pot Life & Recoating Interval:

		10	20	30
Pot Life		30 min	20 min	15 min
RecoatingInterval	Min	35 h	16 h	13 h
RecoatingInterval	Max	9 d	7 d	5 d

Thinning Not required.

Note: if use thinner for ET5500, it will be reduce resistance acid

Method of Application Rake, Trowel.
Film Thickness Recommended per coat 2~3 mm dry.
Shelf Life 12 months (Store in cool, dry, well-ventilated place.)

k.Packing 16 L (PTA : 11 L, PTB : 5 L)

WARNING

a.The paint compounds would occur a headache, dizziness, loss of coordination and health problems, so do not breathe vapors, spray mist and fumes and do not eat the compounds.

During application, to avoid breathing vapors or spray mist, wear the protective mask, protective glasses, gloves and suitable protective equipment.
Please avoid contact with eyes and skin during application, in case of contact with skin and eyes or eating paint, get the first aids by the paint can label on the side and then get the medical, assistance by physician immediately.
Do not apply the paint in restricted areas. If you are obliged to apply in restricted areas, use the ventilation machine to blow out, all workers should wear a protective mask.
Besides application, do not allow to use the paint as fuel.

f. If you have some questions about products or you want to know harmfulness information, you can get the technical datasheets and MSDS on our Internet Homepage(www.kccworld.co.kr) Or ask the customer’s service.